The building had to express PA Technology’s commitment to innovative technical research and be visible from a distance to the approaching visitor. Other requirements included maximum flexibility to permit further growth, a high level of freedom of circulation, flexibility in the arrangement of offices, labs and services.
The design resulted in a very different structural solution to that of the Inmos factory (RRP), despite visual similarities between the two building. PATcentre is on a smaller scale with fewer services to support between the masts. The span is 26 m rather than 40 m. The basic building concept is a central linear spine accommodating coffee shop, library and other communal activities. Open plan laboratories, offices and meeting rooms are located left and right of the top-lit spine.
The single-storey suspended steel structure has at its base a portal frame which supports the dominating tubular AFrame mast, from which are suspended standard steel section beams. Tiedown columns at the outer ends of these beams act in both tension and compression. The standard components formed a kit of parts prefabricated off site and were rapidly erected on site, bay by bay. Site welding was kept to a minimum and stainless steel pin connections were used wherever possible. The plant sits exposed, on suspended cradles connected with trusses to provide longitudinal stability for the A-Frames. Internally the services distribution is exposed, running along the spine supported by cradles with bracing running at right angles underneath the exposed roof beams.
The external walls are clad with proprietary translucent panels with a horizontal glazed strip so that the whole external wall admits light without the thermal disadvantage of using glass.
|Location||Princeton, New Jersey, USA|
|Dates||1982 - 1985|
|Client||PA Consulting Services Inc|
|The Architect||Richard Rogers Partnership|
|Ram Ahronov, Pierre Botschi, Mike Davies, Marco Goldschmied, John McAslan, Gennaro Picardi, Richard Rogers, John Young|
|Co-Architect||Kelbaugh and Lee Architects|
|Quantity Surveyor||GA Hanscomb Partnership|
|GA Hanscomb Associates Inc|
|Services Engineer||Ove Arup & Partners|
|Syska and Hennessy Inc|
|Structural Engineer||Ove Arup & Partners|
|Robert Silman Associates|
Copyright © 2015 Rogers Stirk Harbour + Partners LLP. All rights reserved.